Sunshine Industries

Dear Sir,

FOR ORDER AN INQUIRY CALL & EMAIL US

·            

Stainless Steel Shot is a high-quality spherical abrasive media, widely used for surface cleaning, desanding, deburring, shot peening, and finishing. It is made from durable stainless steel material, ensuring long-lasting performance and superior cleaning results.

• Rust & Corrosion Resistant: Ideal for cleaning non-ferrous and stainless steel parts without causing contamination.

• Eco-Friendly & Recyclable: Can be reused up to 2000–3000 cycles, reducing dust and maintaining a clean working environment.

• High Durability: Tough structure ensures low wear rate and cost-effective long-term use.

• Consistent Finish: Provides smooth, uniform, and bright surface results.

• Material: Stainless Steel (AISI 431 grade or equivalent)

• Chemical Composition: C ~0.2%, Cr ~16%, Ni ~1.5%, Si ~3%, Mn ~1%

• Size Range: 0.075 mm to 2.0 mm

• Hardness: Approx. 36 HRC

• Shape: Spherical / Round

• Density: ≥ 7.0 g/cm³

• Packaging: 20 Kg Bags / Heavy Duty Wooden Boxes

• Casting Industry: Removal of scale and residues from castings

• Weld Cleaning: Removing welding slag and impurities

• Shot Peening: Strengthening metal surfaces and improving fatigue resistance

• Automotive & Metal Finishing: Surface preparation before coating, painting, or polishing

• General Engineering: Cleaning and polishing of stainless steel and non-ferrous components

• Select the appropriate grain size and hardness according to the job requirement.

• Maintain the operating mix of abrasives for consistent results.

• Regularly check for recyclability to ensure stable quality and longer life.

• Dust-Free Cleaning for a healthier workplace

• Chemical-Free Process, safe for stainless and non-ferrous parts

• Cost-Effective due to high recycling rate

• Improves Productivity with faster and cleaner results

⚙️ Perfect choice for surface cleaning and finishing solutions in casting, automotive, fabrication, and engineering industries.

Abrasive steel shot is a type of steel used for abrasive blasting or shot peening, commonly employed in various industrial applications for cleaning, surface preparation, and strengthening materials. It consists of small, spherical pellets made from high-carbon steel, designed to efficiently clean or finish the surfaces of metals and other materials.

1. Shot Blasting/Cleaning:

   • Steel shot is often used in abrasive blasting (or shot blasting), a process where the steel shot is propelled at high speed onto a surface to clean, smooth, or remove contaminants, like rust, scale, and paint.
   • It is widely used in industries like automotive manufacturing, metalworking, and construction for cleaning and surface preparation.

2. Shot Peening:

   • In shot peening, steel shot is used to induce compressive stress on a material's surface to improve its fatigue resistance, prevent cracking, and enhance the strength of metal parts, particularly in industries like aerospace, automotive, and heavy machinery.

3. Surface Finishing:

   • Steel shot is also used for polishing or finishing the surface of metal parts to improve their appearance, remove burrs, or create specific surface textures.

• Durability: Steel shot can be reused multiple times before it needs to be replaced, making it a cost-effective option.
• Efficiency: Due to its high density, it is efficient at removing coatings, corrosion, or surface defects.
• Environmentally Friendly: Steel shot is often preferred over sand or other materials because it is non-toxic and does not create dust clouds like sandblasting.
• Variety: Available in different sizes and hardness levels, which allows for tailored applications based on the specific needs of the job.

1. Standard Steel Shot:

   • This is the most commonly used type for general-purpose abrasive blasting and peening.

2. High-Carbon Steel Shot:

   • Used for applications requiring harder and more durable abrasive material, often in more aggressive cleaning or peening tasks.

3. Cut Steel Shot:

   • Made by cutting steel wire into small segments, this shot is sometimes used for heavier applications requiring more forceful impact.

4. Stainless Steel Shot:

   • For environments where resistance to corrosion or rusting is critical (e.g., food or pharmaceutical industries), stainless steel shot is preferred.

Abrasive steel shot is available in various sizes, typically measured by the American Standard Test Sieve (ASTM) or the diameter in millimeters or inches. The size of the shot selected depends on the job's specific requirements, including the type of material being worked on and the degree of abrasion needed.

Let me know if you'd like more details about specific grades, sizes, or applications!

Steel shot refers to small, spherical pellets made from steel, commonly used for cleaning, surface preparation, and shot blasting applications. It’s typically used in industries like manufacturing, automotive, and metalworking. Steel shot is often preferred over other media like sand or glass beads due to its durability and recyclability. It is also used in the process of sandblasting for cleaning surfaces or creating a rough texture on a material.

Would you like more specific information on its uses or types?

Stainless Steel Shot is a high-quality spherical abrasive media, widely used for surface cleaning, desanding, deburring, shot peening, and finishing. It is made from durable stainless steel material, ensuring long-lasting performance and superior cleaning results.

• Rust & Corrosion Resistant: Ideal for cleaning non-ferrous and stainless steel parts without causing contamination.

• Eco-Friendly & Recyclable: Can be reused up to 2000–3000 cycles, reducing dust and maintaining a clean working environment.

• High Durability: Tough structure ensures low wear rate and cost-effective long-term use.

• Consistent Finish: Provides smooth, uniform, and bright surface results.

• Material: Stainless Steel (AISI 431 grade or equivalent)

• Chemical Composition: C ~0.2%, Cr ~16%, Ni ~1.5%, Si ~3%, Mn ~1%

• Size Range: 0.075 mm to 2.0 mm

• Hardness: Approx. 36 HRC

• Shape: Spherical / Round

• Density: ≥ 7.0 g/cm³

• Packaging: 20 Kg Bags / Heavy Duty Wooden Boxes

• Casting Industry: Removal of scale and residues from castings

• Weld Cleaning: Removing welding slag and impurities

• Shot Peening: Strengthening metal surfaces and improving fatigue resistance

• Automotive & Metal Finishing: Surface preparation before coating, painting, or polishing

• General Engineering: Cleaning and polishing of stainless steel and non-ferrous components

• Select the appropriate grain size and hardness according to the job requirement.

• Maintain the operating mix of abrasives for consistent results.

• Regularly check for recyclability to ensure stable quality and longer life.

• Dust-Free Cleaning for a healthier workplace

• Chemical-Free Process, safe for stainless and non-ferrous parts

• Cost-Effective due to high recycling rate

• Improves Productivity with faster and cleaner results

⚙️ Perfect choice for surface cleaning and finishing solutions in casting, automotive, fabrication, and engineering industries.

Abrasive steel shot is a type of steel used for abrasive blasting or shot peening, commonly employed in various industrial applications for cleaning, surface preparation, and strengthening materials. It consists of small, spherical pellets made from high-carbon steel, designed to efficiently clean or finish the surfaces of metals and other materials.

1. Shot Blasting/Cleaning:

   • Steel shot is often used in abrasive blasting (or shot blasting), a process where the steel shot is propelled at high speed onto a surface to clean, smooth, or remove contaminants, like rust, scale, and paint.
   • It is widely used in industries like automotive manufacturing, metalworking, and construction for cleaning and surface preparation.

2. Shot Peening:

   • In shot peening, steel shot is used to induce compressive stress on a material's surface to improve its fatigue resistance, prevent cracking, and enhance the strength of metal parts, particularly in industries like aerospace, automotive, and heavy machinery.

3. Surface Finishing:

   • Steel shot is also used for polishing or finishing the surface of metal parts to improve their appearance, remove burrs, or create specific surface textures.

• Durability: Steel shot can be reused multiple times before it needs to be replaced, making it a cost-effective option.
• Efficiency: Due to its high density, it is efficient at removing coatings, corrosion, or surface defects.
• Environmentally Friendly: Steel shot is often preferred over sand or other materials because it is non-toxic and does not create dust clouds like sandblasting.
• Variety: Available in different sizes and hardness levels, which allows for tailored applications based on the specific needs of the job.

1. Standard Steel Shot:

   • This is the most commonly used type for general-purpose abrasive blasting and peening.

2. High-Carbon Steel Shot:

   • Used for applications requiring harder and more durable abrasive material, often in more aggressive cleaning or peening tasks.

3. Cut Steel Shot:

   • Made by cutting steel wire into small segments, this shot is sometimes used for heavier applications requiring more forceful impact.

4. Stainless Steel Shot:

   • For environments where resistance to corrosion or rusting is critical (e.g., food or pharmaceutical industries), stainless steel shot is preferred.

Abrasive steel shot is available in various sizes, typically measured by the American Standard Test Sieve (ASTM) or the diameter in millimeters or inches. The size of the shot selected depends on the job's specific requirements, including the type of material being worked on and the degree of abrasion needed.

Let me know if you'd like more details about specific grades, sizes, or applications!

SUNSHINE INDUSTRIES

(STEEL SHOT AND CUT WIRE SHOT MFG) 

FOR ORDER AN INQUIRY CALL & EMAIL US

Steel shot is a type of abrasive media made from high-quality steel, typically used in surface cleaning, shot blasting, and peening applications. It is spherical in shape, which allows for a consistent and uniform impact during the abrasive process. Steel shot is commonly used in various industries for both cleaning and strengthening metal surfaces.

1. Shape: Steel shot is spherical in shape, which allows it to be used in abrasive blasting processes that require a consistent, even impact across the surface. This helps avoid surface damage during blasting.
2. Durability: Steel shot is highly durable and can be reused many times, which makes it a cost-effective option compared to other types of abrasive media, such as sand or glass beads.
3. Hardness: Steel shot is available in different hardness levels, making it suitable for different applications. The hardness of the shot depends on the steel composition used to manufacture it.
4. Magnetic: Steel shot is magnetic, which can be advantageous in specific applications where magnetic properties are needed.

1. Surface Cleaning:

   • Rust and Scale Removal: Steel shot is widely used for cleaning metal surfaces by removing rust, scale, and other contaminants. It is effective in shot blasting applications where metal parts, such as castings or steel structures, need to be cleaned before further processing, coating, or painting.
   • Cleaning of Castings: Steel shot is used in foundries to clean cast metal parts after they have been cast. The shot removes excess sand, dirt, and scale from the surface of the castings, making the metal parts ready for further processing.
   • Heavy Machinery Cleaning: It is used to clean heavy industrial machinery, parts, or components, especially those exposed to high levels of dirt, grease, or other materials.

2. Shot Peening:

   • Fatigue Strengthening: Steel shot is commonly used in shot peening, a process where the steel shot is blasted onto metal surfaces to induce compressive stress, improving the surface’s fatigue resistance. This process is often used in industries like aerospace and automotive to strengthen critical components like turbine blades, engine parts, and gears.
   • Improving Durability: Shot peening with steel shot increases the durability and longevity of metal parts by preventing the formation of cracks and extending the lifespan of mechanical components under stress.

3. Surface Finishing:

   • Improving Surface Texture: Steel shot can be used in processes where a specific surface texture is required, such as creating a rough surface profile for better adhesion of coatings or paints.
   • Polishing and Smooth Finishing: Steel shot can also be used to smooth and polish metal surfaces. The spherical shape allows for a uniform finish without creating deep abrasions on the material.

4. Deburring:

   • Steel shot can be used to remove burrs or sharp edges from machined metal parts. This is important for improving the quality and safety of the finished parts, especially in industries like automotive, aerospace, and electronics.

5. Cleaning of Steel Parts:

   • It is extensively used in industries like automotive manufacturing, aerospace, and heavy equipment for cleaning steel components like frames, chassis, and engine parts. Steel shot helps maintain cleanliness and smoothness, essential for the performance and durability of these parts.

Additional Information:

• Item Code: SHOTS
• Production Capacity: 4000MT
• Delivery Time: READY STOCK
• Packaging Details: 25KG HDPE BEGS

Cast Stainless Steel (Cast SS) Shot is an abrasive media made from stainless steel that has been cast into a spherical shape and is used primarily in shot blasting and shot peening applications. This type of shot is specifically designed for surface cleaning, finishing, and enhancing the mechanical properties of metal components through controlled blasting or peening.

1. Material Composition:

   • Stainless Steel: Cast SS shot is made from high-quality stainless steel, typically grades like 304, 316, or 410, depending on the desired properties.
     • 304 Stainless Steel: Commonly used for its excellent corrosion resistance and general-purpose applications.
     • 316 Stainless Steel: Provides superior resistance to corrosion, particularly in harsh environments, such as marine or food industries.
     • 410 Stainless Steel: A martensitic stainless steel that provides increased hardness, making it suitable for more demanding applications.

2. Casting Process:

   • Unlike other types of stainless steel shot, which are produced by cutting wire into spherical shapes, cast SS shot is made by melting stainless steel and pouring it into molds to form the spherical shapes. This casting process results in a more uniform structure and consistent size of the shot.

3. Shape:

   • Spherical: The shot is round in shape, which helps ensure uniform impact during blasting or peening. The spherical nature of the shot allows for a consistent and controlled abrasive action that is gentle on the substrate but effective in cleaning, deburring, or finishing.

4. Hardness:

   • Cast SS shot is typically available in varying hardness levels, typically ranging from 40-55 HRC (Rockwell hardness) depending on the grade of stainless steel and its intended application.
     • Higher hardness levels are ideal for more aggressive cleaning or shot peening tasks, while lower hardness is better for delicate surface finishes or polishing.

5. Size:

   • Cast SS shot comes in a variety of sizes, from fine to coarse, depending on the intended application. The size chosen will affect the aggressiveness of the cleaning or peening process. Smaller sizes are used for finer surface preparation or polishing, while larger sizes are used for heavy-duty cleaning and deburring.

6. Durability:

   • Durability is one of the key advantages of cast SS shot. Due to its stainless steel composition, it resists wear and maintains its integrity for a longer period compared to other abrasive media. This reusability makes it a cost-effective choice for industries with high-volume shot blasting or peening operations.

7. Corrosion Resistance:

   • Corrosion resistance is one of the standout features of cast SS shot. Unlike carbon steel shot, cast SS shot will not rust, making it ideal for environments where moisture or chemicals are present. This feature also makes it suitable for cleaning or preparing parts used in harsh environments, such as marine, food processing, or pharmaceutical industries.

Dear Sir,

FOR ORDER AN INQUIRY CALL & EMAIL US

·